总线
总线 (正體)
PCI Express总线的插槽 (由上到下:x4、x16、x1和x16),最下边的一条是传统的32-bit PCI总线插槽
总线又称计算机总线或系统总线(BUS),台湾譯作「匯流排」,是指计算机组件间规范化的交换数据(Data)的方式,即以一种通用的方式为各组件提供数据传送和控制逻辑。从另一个角度来看,如果说主板(Mother Board)是一座城市,那么总线就像是城市里的公共汽车(bus),能按照固定行车路线,传输来回不停运作的比特(bit)。这些线路在同一时间内都仅能负责传输一个比特。因此,必须同时采用多条线路才能传送更多资料,而总线可同时传输的资料数就称为宽度(width),以位元为单位,总线宽度愈大,传输效能就愈佳。总线的带宽(Bandwidth),也就是单位时间内可以传输的总资料数(单位是Bytes/sec):总线带宽 = 频率 x 宽度。
种类
PC上一般有五种总线通路:
- 资料总线(Data Bus):在CPU与RAM之间来回传送需要处理或是需要储存的资料。
- 位址总线(Address Bus):用来指定在随机存取内存(Random Access Memory)之中储存资料的位址。
- 控制总线(Control Bus):将微处理器控制单元(Control Unit)的讯号,传送到周边装置,一般常见的为USB Bus与1394 Bus。
- 扩充总线(Expansion Bus):可连接扩充槽和电脑。
- 区域总线(Local Bus):取代更高速资料传输的扩充总线。
内部总线
并行
- CAMAC,用于仪表检测系统
- 工业标准架构总线(ISA)
- 扩展ISA(EISA)
- Low Pin Count(LPC)
- 微通道(MCA)
- MBus
- 多总线(Multibus),用于工业生产系统
- NuBus,或称IEEE 1196
- OPTi本地总线,用于早期Intel 80486主板
- 外围部件互联总线(PCI)
- S-100总线(S-100 bus),或称IEEE 696,用于Altair或类似微处理器
- SBus 或称IEEE 1496
- VESA本地总线(VLB,VL-bus)
- VERSAmodule Eurocard bus(VME总线)
- STD总线(STD bus),用于八位或十六位微处理器系统
- Unibus
- Q-Bus
串行
- 1-Wire
- HyperTransport
- I²C
- 串行PCI(PCIe)
- 串行外围接口总线(SPI总线)
- USB通用串行总线
- 火线i.Link(IEEE 1394)
外部总线
平行
- Advanced Technology Attachment 或称 ATA(aka PATA, IDE, EIDE, ATAPI, etc.) disk/tape peripheral attachment bus
(the original ATA is parallel, but see also the recent serial ATA)
- HIPPI 高速平行接口(HIgh Performance Parallel Interface)
- IEEE-488 (aka GPIB, General-Purpose Instrumentation Bus, and HPIB, Hewlett-Packard Instrumentation Bus)
- PC card, 前身是知名的 PCMCIA, much used in laptop computers and other portables, but fading with the introduction of USB and built-in network and modem connections
- SCSI 小型电脑系统接口(Small Computer System Interface), disk/tape peripheral attachment bus
串行
外部链接
Why are we here?
All text is available under the terms of the GNU Free Documentation License
This page is cache of Wikipedia. History